Validate serves use type?

The use type validation requires certain assets (Fixtures, Hot Water Systems, HVAC Systems) to link to at least one use type (location).

The following example shows that HVAC violates the use type validation.

To fix the validation error, click "Add Space", then at the "Location" dropdown menu, choose the location to link to.

For Juridiction ADMIN:

To enable use type coverage validation, a jurisdiction ADMIN can configure the "Validate serves use type?" items within the "Coverage Validation Requirements" section at the JCT template editing page. The following shows the use type validation configuration UI for Fixtures.


Validate common area coverage?

The common area coverage validation requires the sum of the common area served by the assets (Fixtures, Hot Water Systems, HVAC Systems) must equal to or over 100 percent.

Here are some valid examples:

Valid case 1

  • Use Type 1 ("Office")
  • HVAC System 1
    • Serves Use Type 1 - 60% Common
  • HVAC System 2
    • Serves Use Type 1 - 40% Common
       

Valid  case 2

  • Use Type 1 ("Office")
  • HVAC System 1
    • Serves Use Type 1 - 70% Common
  • HVAC System 2
    • Serves Use Type 1 - 30% Common
  • HVAC System 3
    • Serves Use Type 1 - 0% Common

 

Valid case 3                

  • Use Type 1 ("Office")
  • HVAC System 1
    • Serves Use Type 1 - 70% Common
  • HVAC System 2
    • Serves Use Type 1 - 70% Common
  • HVAC System 3
    • Serves Use Type 1 - 0% Common

Here is an invalid example: (note that the sum of the common area served is less than 100%)

Invalid case 1

  • Use Type 1 ("Office")
  • HVAC System 1
    • Serves Use Type 1 - 60% Common, 50% Tenant
  • HVAC System 2
    • Serves Use Type 1 - 30% Common, 50% Tenant

A common area validation error message looks similar as follows:

To fix the error violation, specify the "Percent Common Area" field and make sure the sum of the common area served by the assets satisfies the requirements.

For Juridiction ADMIN:

To enable use type coverage validation, a jurisdiction ADMIN can configure the "Validate common area cover? " items within the "Coverage Validation Requirements" section at the JCT template editing page. The following shows the common area coverage validation configuration UI for Fixtures.

Validate tenant area coverage? 

The tenant area coverage validation requires the sum of the tenant area served by the assets (Fixtures, Hot Water Systems, HVAC Systems) must equal to or over 100 percent.

Here are some valid examples:

Valid case 1

  • Use Type 1 ("Office")
  • HVAC System 1
    • Serves Use Type 1 - 60% Tenant
  • HVAC System 2
    • Serves Use Type 1 - 40% Tenant
       

Valid  case 2

  • Use Type 1 ("Office")
  • HVAC System 1
    • Serves Use Type 1 - 70% Tenant 
  • HVAC System 2
    • Serves Use Type 1 - 30% Tenant
  • HVAC System 3
    • Serves Use Type 1 - 0% Tenant

 

Valid case 3                

  • Use Type 1 ("Office")
  • HVAC System 1
    • Serves Use Type 1 - 70% Tenant
  • HVAC System 2
    • Serves Use Type 1 - 70% Tenant
  • HVAC System 3
    • Serves Use Type 1 - 0% Tenant

Here is an invalid example: (note that the sum of the tenant area served is less than 100%)

Invalid case 1

  • Use Type 1 ("Office")
  • HVAC System 1
    • Serves Use Type 1 - 60% Tenant
  • HVAC System 2
    • Serves Use Type 1 - 30% Tenant

A Tenant area validation error message looks similar as follows:

To fix the error violation, specify the "Percent Common Area" field and make sure the sum of the common area served by the assets satisfies the requirements.


For Juridiction ADMIN:

To enable use type coverage validation, a jurisdiction ADMIN can configure the "Validate tenant area cover? " items within the "Coverage Validation Requirements" section at the JCT template editing page. The following shows the tenant area coverage validation configuration UI for Fixtures.